PRO-DIE HARDENER

al dente

Pro-Die Hardener (Oμ) for hardening, sealing and protecting dies and margins. Does not build up. Is completely absorbed by the plaster.
STEPS IN COATING THE DIE

  • Clear the preparation border and mark it.
  • Apply hardener (0 μ) on the preparation border only for fixing the preparation limit.
  • Apply Pro-Die or Pro-Lux Spacer approx. 1 mm above the preparation border.
  • Allow die to dry for a few minutes.
  • Attention: The die is supposed to be dust free and dry.
  • The die must not be primed with cyanoacrylates.
  • Apply light curing spacers as thin as possible.

Pro-Die Hardener 2 x 20 ml




Related Items