Orthodontics
AQUA PRESSURE POT 4,5 L
R3,012.97
The AQUA Pressure Pot is ideal for a homogenous and blister-free polymerization of auto-polymerizates. Includes filling hose Stainless steel Technical Data Diameter (interior): 220 mmHeight (interior): 110 mmCapacity: approx. 4,5 LOperating pressure: 2,0 barWorking overpressure: max....
AQUA PRESSURE POT 7 L
R4,165.63
The AQUA Pressure Pot is ideal for a homogenous and blister-free polymerization of auto-polymerizates.The huge capacity of this pot gives room for all standard articulators, flasks and reline jigs.Thereby e.g. orthodontic splints can be produced directly...
BFS COMBILOC transpa ø 120 mm
R450.00
Application:Comfortable stabilization and occlusal splints.Material:Hard side:SBS styrol-butadien-styrolSoft side:EVA ethyl-vinyl-acetateHard/soft double layer plate.Hard layer adjustable by using additional acrylics. Convenient for the patient due to the flexible layer. 2.0 mm (1,0 mm soft + 0,8 mm...
Biochamber
R1,951.23
With an exhaustion system, the Biochamber was exclusively designed for work done with the Microblaster, and assures more cleanness, providing efficiency, safety and functionality during the blasting process. ...
BLOCKING OUT COMPOUND
R135.26
A permanently flexible blockout material for covering undercuts prior to thermoforming. 0.2 kg
BLOCKING OUT WAX
R268.56
For the thermoforming techniqueThe wax can be easily removed by using boiling water. white 110 g
BLOCKOUT
R150.94
Light-curing material with very good sculpturing and adhering properties. al dente Blockout can be polymerized in any current light-curing unit. After hardening al dente Blockout is edge-stable and can be reworked.Now also available in a more fluidal...
COMBILOC transpa ø 120 mm
R584.94
Application:Comfortable stabilization and occlusal splints.Material:Hard side:SBS styrol-butadien-styrolSoft side:EVA ethyl-vinyl-acetateHard/soft double layer plate.Hard layer adjustable by using additional acrylics. Convenient for the patient due to the flexible layer. 2.0 mm (1,0 mm soft + 0,8 mm...
DUNAFORM PRESSURE FORMER
R25,600.00
A thermoforming device for all applications of the dental thermoforming technique in the laboratory and in the clinic. Operating parameters are programmed by means of keypads. All important information is shown...
EVA Square Sheets 126 mm 10 pack 1 and 2 mm
R65.31
Mouthguard/Mio-relaxing/Whitening/Fluoride
FILLING GRANULES
R419.50
V2A high-grade steel Non-leaded filling granules for embedding models.Suitable for all thermoforming units. 1 kg
FOLIDUR N transpa ø 120 mm
R253.86
Application:Occlusal splints, bruxism splints, stabilization splints, drum splints, miniplast splints, dressing plates, retainers, Clear AlignersMaterial:PRTG copolyester Transparent hard-elastic foil, also impact-hard and well suitable for thermoforming.Bonds with acrylate. Pre-drying not necessary. 0.5m, 1mm, 1.5mm, 2mm, 3mm
FOLIDUR S transpa ø 120 mm
R248.96
Application: Occlusal splints, bruxism splints, stabilization splints, Drum splints, miniplast splints, dressing plates, retainer, temporary dentures, retainer plates, Clear AlignersMaterial:SBS styrol-butadien-styrol A springy, impact resistant sheet, very well mouldable.Bonds with acrylate. Bonds with FOLIFLEX foil under heat and pressure...
FOLIFLEX BLEACH transpa ø 120 mm
R354.81
Application:Bleaching trays, fluoride trays, medication traysMaterial:EVA ethyl-vinyl-acetateA soft, pliable, elastic sheet which can be heat-welded.Cannot be bonded with acrylate. Thickness 1mm, 20pcs & 100pcs
FOLIFLEX transpa ø 120 mm
R244.06
For the fabrication of sports mouthguards, bracket transfer splints, positioners, model duplications and other soft splints.Material:EVA ethyl-vinyl-acetateA soft, pliable, elastic sheet which can be heat-welded.Cannot be bonded with acrylate. 1-4 mm 10,20,50,100pcs
FOLILEN opak ø 120 mm
R147.02
Application:Bleaching Tray, medication trays, moulded pieces, moulds for provisional solutions, transfer splints, gingival dressingsMaterial:PE PolyethylenSoft, elastic foil, burns without residues. Cannot be bonded with acrylate.
Microblaster Plus Model
R2,500.00
For Intra-Oral use Made of Stainless steel Two autoclavable nozzles One for posterior teeth at 90 degree angle One for Anterior teeth at 138 degree angle Cement removal on crowns, inlays,orthodontic brackets...
Microblaster Standard Lab
R1,700.00
Ideal and handy too use at the Chair-side. Remove cement from Metal, Resin and Ceramic crowns Internal cleaning of Inlays and Onlays Roughening surfaces for repairs on ceramic Create micro...
TREATMENT SET
R201.88
For processing and finishing thermoforming foils. Treatment set FISSURE BUR SQUARE - For a coarse processing of thermoforming foils.FISSURE BUR SPIRAL - For a coarse processing of thermoforming foils.HSS TWIST DRILL ø 1,0 mm - For...
TRIFORM PRESSURE THERMOFORMING UNIT
R14,700.00
The new triform by is an easy-to-handle pressure thermoforming unit for your daily work in dental practice and lab: Suitable for all foils with a material diameter of 120-125 mm (round)...
Verticulator
R967.98
Precision in occlusal adjustment and registration of every feature on the teeth surface during the construction of total crowns or fixed prostheses. It can be used in matrix anatomic type,...
© 2020 SmileQuip. Designed by Out of the Sandbox. Powered by Shopify
